Japanese Site

Thai Site

CONTACT

WDX series | Digital "DYNASHOCK" ultrasonic cleaner|WDX-600-I / WDX-1200-I / WDX-600-Ⅱ
[Ultrasonic Cleaners [ Industrial use ]]

Overview


"DYNASHOCK" modulation technology by full digital control circuit enables variety of applications from physically tough stains to micro-fine contamination with small risk of damage of erosion.



DYNASHOCK Modulation

The technology to control the mixture ratio of two different frequency generated  by the same transducers keeping the same output power. It delivers best matching ultrasonic cleaning power for the cleaning work.

Lower frequency applies for hard and strong power to hard and stubborn contamination or stains. Higher frequency cleans fine and delicate structure with minimum damage to the cleaning work.

The power ratio of two frequencies is named as "DM ratio". Where the low frequency power is PL and High frequency power is PH, DM ratio can be calculated as PL / PH.

wdx modulation



 list1 Sample image of alminum foil erosion test vs. DM ratio.
  (Output popwer is 600 W continuous)

comparison examples


Feqtures
list1 Dynamic Modulation can avoid damage and enables wide range of cleaning from fine material to hard structure.
list1 Modulation ratio can be adjusted and spread high acoustic pressure around entire area in a tank, thus the equable cleaning is achieved.

Sound pressure distribution map  


list1 Full digital control also realized advanced functions as below.
Optimized cleaningFrequency optimization and output power control enables stable Ultrasonic cleaning.
Easy MaintenanceAutomatic tuning function eliminates the manual calibration of oscillator when exchanging the transducer unit.
Power SourceWide range of power voltage is supported. 200 V AC to 240 V AC±10%
Monitoring FunctionOutput power can be controlled from the front panel.
Self DiagnoseIn the case of error, the error message shows the problems.
Sweep FunctionFrequency sweep operation adds even more even distribution of power in a tank.
 
Purpose / Object
  • Metal, mechanical parts cleaning
  • Fine, Micro-mechanical parts cleaning
  • PCB cleaning, Solar cell material cleaning
  • HDD parts, LCD parts, Optical parts cleaning
  • Fine cleaning for Semiconductor industry
  • Delicate cleaning for medical or food industry 

Go to Generator specification
Go to Vibration unit specification

Generator

Specification

Model No.WDX-600-IWDX-1200-I
WDX-600-Ⅱ
Oscillation mode DYNASHOCK Modulation (DM) mode (modulation ratio: 0 to 100 %) + Sweep function
Rated output
600 W 1200 W 600 W
Nominal oscillation frequency
28kHz, 75kHz 40kHz, 120kHz
Power input 200V - 240V AC
50/60Hz 1200VA
200V - 240V AC
50/60Hz 2400VA
200 - 240V AC
50/60Hz 1200VA
Dimension
(WxDxHmm)
330 × 462 × 148  
(including rubber feet)
Weight 11 kg
12 kg 11k g
list1 I/O interface:
  Remote function : Ultrasonic oscillation ON/OFF (contact input)
  Output function : Alarm output when error occurs (Relay contact output : Open when error occurs)
list1 Variable output range : 0 to 100 %
list1 Display function : Power output (W),  DM modulation ratio (%), Error messages
list1 Ambient operating environment :
  Temperature : 5 to 40℃
  Humidity : 5 to 80 % (no condensation)
list1 Power cable length : 3.5 m
list1 Option: Transducer connection terminal block

矢印Option Parts



Example setup
Example set up


        

Transducer unit

Specification
* Customization of vibration unit is available.
N Type | Immersible typeN type 投込みタイプ
Model No.WDX-600N-IWDX-1200N-IWDX-600N-Ⅱ
Generator model No.
WDX-600-I WDX-1200-I WDX-600-Ⅱ
Maximum allowable input 600 W 1200 W
600 W
Nominal driven frequency 28kHz, 75kHz 
40kHz, 120kHz
Effective cleaning area
(WxDmm)
350x200 
420x300
350x200
Dimensions (WxDxH mm)
350x200x100 420x300x100 350x200x75
Material Case: SUS304 (SUS316L optionally available)
Weight 14 kg 18 kg 11 kg
list1 Liquid temperature range : 5 to 80℃
list1 Transducer : Bolt-clamped Langevin type
list1 Transducer cable length : 2.5 m(blade part 2m) + Output cable length 3.5 m

F Type | Vibration plate typeF type 振動板タイプ
Model No.WDX-600F-IWDX-1200F-IWDX-600F-Ⅱ
Generator model No. WDX-600-I WDX-1200-I WDX-600-I
Maximum allowable input 600 W 1200 W 600 W
Nominal driven frequency 28kHz, 75 kHz 40kHz, 120 kHz
Effective cleaning area
(WxDmm)
350x200 
420x300
350x200v
Dimensions (WxDxHmm)
(wires not inclulded)

390x240x83
t=2.5 mm
460x340x83
t=2.5 mm
390x240x57
t=2.5 mm
Material Plate: SUS304 (SUS316L, hastelloy optionally available)
Packing: EPDM t=3mm (viton or others optionally available)
Weight 10k g 16 kg 8 kg
list1 Liquid temperature range : 5 to 100℃
list1 Transducer : Bolt-clamped Langevin type
list1 Transducer cable length: 3.5 m + Output cable length 3.5 m

 make to order S Type | Tank typeS type 槽タイプ
Model No.WDX-600S-IWDX-1200S-IWDX-600S-Ⅱ
Generator model No. 
WDX-600-I WDX-1200-I WDX-600-Ⅱ
Maximum allowable input 600 W 1200 W 600 W
Nominal driven frequency 28kHz, 75 kHz 40kHz, 120 kHz
Effective cleaning area
(WxDmm)
370 x 250
500x300
370 x 250
Dimensions
(WxDxHmm)
External
(including rubber feet)
422x302x405
500x350x402 422x302x405
Inside tank 370x250x250(23 L) 500x300x224(35 L) *1
366x246x248(23 L)
Material Tank: SUS304 (SUS316L optionally available)
Weight 22 kg 39 kg 19 kg
Include accessary : Lid
list1 Liquid temperature range : 5 to 100℃
list1 Transducer : Bolt-clamped Langevin type
list1 Transducer cable length: 3.5 m
list1 Option: Cleaning basket (KG10F/KG11T)

矢印to Option Parts


make to order SH Type | Tank type with heaterSH type ヒーター付槽タイプ
Model No.WDX-600SH-IWDX-1200SH-IWDX-600SH-Ⅱ
Generator model No. 
WDX-600-I WDX-1200-I WDX-600-Ⅱ
Maximum allowable input 600 W 1200 W 600 W
Nominal driven frequency 28kHz, 75 kHz 40kHz, 120 kHz
Heater 200V AC 50/60Hz 2kW 200V AC  50/60Hz 3kW 200V AC  50/60Hz 2kW
Effective cleaning area
(WxDmm)
370x250
500x300
370x250
Dimensions
(WxDxHmm)
External
(including rubber feet)
580x310x406 710x360x405 580x310x406
Inside tank 370x250x250 (23 L) 500x300x224 (35 L) *1
370x250x250 (23 L)
Material Tank: SUS304 (SUS316L optionally available)
Weight 28 kg 46 kg 25 kg
Included accessary : Lid
list1 Liquid temperature range : 5 to 100℃
list1 Transducer : Bolt-clamped Langevin type
list1 Transducer cable length: 3.5 m
list1 Option: Cleaning basket (KG10F/KG11T)
* The heater is designed for use with water. Do not use with liquid other than water.
* Separate power supply is required for the heater.

*1 : The bottom surface of the tank is angled to facilitate drainage.

矢印to Option Parts


Industrial Equipment TEL:81-532-41-2774