Japanese Site

Thai Site

CONTACT

WSC28 / WSC40 | Low frequency ultrasonic cleaner
[Ultrasonic Cleaners [ Industrial use ]]

Overview

Combination of self-developed BLT and FM + AM oscillation realizes high performance efficiently. WSC28 and WSC40 is suitable for heavier contamination like greece or metal turnings or parings. 

Feature
list1 "FM + AM" mode is hired for ultrasonic oscillation.
  FM = Frequency modulation, AM = Amplitude Modulation
  It realizes equable cleaning result to entire area.
list1 Downsized generator is 1/3 of traditional type of generators.
  Electrical consumption is extremely improved.

FM+AM Oscillation mode
FM+AM
FM stands for Frequency Modulation that increase and decrease the ultrasonic frequency continuously and gradually. AM stands for Amplitude Modulation that the ultrasonic power increase and decrease continuously and gradually.
Adding these two modulation at the same time, it prevents standing wave and avoids erosion problem during the cleaning process and improves the equality of the cleaning result on the work. It also effective for the load change caused by cleaning work, cleaning media or its depth and so on.

Generator

Specification

Model No. WSC28 WSC40
Type Standard High-Power Standard High-Power
Oscillation mode FM+AM modulation    
Maximum output
(average output)
600 W (200 W) 
1200 W (400 W) 600 W (200 W) 1200 W (400 W)
Nominal oscillation frequency 28kHz 40kHz
Power input 200 - 230 VAC , 50/60 Hz
300 VA
600 VA 300 VA 600 VA
Dimensions
(WxDxHmm)
210 × 250 × 107 
(including rubber feet)
Weight 3.6 kg  
list1 I/O interface: 
 Remote function : Ultrasonic oscillation ON/OFF (contact input)
 Output function : Alarm output when error occurs (Relay contact output : Open when error occurs)
list1 Variable output range : 0 to 100 %, continuously variable
list1 Ambient operating environment :
  Temperature : 5 to 40℃
  Humidity : 5 to 80 % (no condensation)
list1 Power cable length : 3.5 m
list1 Options : I/O remote cable (5m), Transducer connecting terminal block

Example setup
WSC28,40 Generator


Transducer unit


Specification
* Customization of vibration unit is available include such as low pressure use.
N
Type | Immersible typeN type 投込みタイプ
Model No. WSC28ST-N WSC28HP-N WSC40ST-N WSC40HP-N
Type Standard High-Power Standard High-Powe
Generator model No. WSC28 Standard
WSC28
High-Power
WSC40 Standard WSC28
High-Power
Maximum allowable input 600 W 1200 W 600 W 1200 W
Nominal driven frequency 28kHz
40kHz
Effective cleaning area
(WxDmm)
350x200
420 x300 350x200 420 x300 
Dimensions (WxDxHmm)
350x200x100 420x300x100 350x200x75 420x300x75
Material Case: SUS304 (SUS316L optionally available)
Weight 8 kg 14 kg 7 kg 12 kg
list1 Maximum liquid temperature : 5 to 80℃
list1 Transducer : Bolt-clamped Langevin type
list1 Transducer cable length : 2.5 m (blade part 2m) + Output cable length 3.5 m

F Type | Vibration plate typeF type 振動板タイプ
Model No.WSC28ST-FWSC28HP-F WSC40ST-FWSC40HP-F
Type Standard High-Power Standard High-Power
Generator model No. WSC28
Standard
WSC28
High-Power
WSC40
Standard
WSC28
High-Power
Maximum allowable input 600 W 1200 W 600 W 1200 W
Nominal driven frequency 28kHz
40kHz
Effective cleaning area
(WxDmm)
350x200
420 x300 350x200 420 x300 
Dimensions (WxDxHmm)
(wires not included)
390x240x71 460x340x71 390x240x57 460x340x57
t=2.5 mm
Material Plate : SUS304 (SUS316L, hastelloy optionally available)
Packing : EPDM t=3mm (viton or other optionally material available)
Weight 5 kg 9 kg 4 kg 8 kg
list1 Maximum liquid temperature : 100℃
list1 Transducer : Bolt-clamped Langevin type 
list1 Transducer cable length: 3.5 m + Output cable length 3.5 m


Industrial Equipment TEL:81-532-41-2774