Japanese Site


[Ultrasonic Cutters]



***Ultrasonic cutter is a tool to help you with cutting tough material that require strong force.***

The blade of Ultrasonic cutter is vibrated in ultrasonic frequency by internal ceramics transducer.
High speed vibration, 40,000 cycle per second (40 kHz) assists smooth cutting.

Usage examples (reference)
-Synthetic resin, Plastic, Epoxy putty, Paper/cardboard, Chemical fiber/cloth, polyester putty, Object made by 3D printer, Silicone etc. 
-Thickness: 3 mm maximum
-Plastic scale models, military models, railway models, mini4WD, figure, dioramas, dollhouse, gourd hole drilling, cartonnage, cardboard craft, deburring in garage kit production, printed circuit board pattern modification, white metal and wood cutting in sailing ship model making.

-Holding down the hand-piece switch and the blade is vibrated.
-Only normal mode.
-10 minutes operation.
-A temperature sensor is equipped inside of the hand-piece.
(In case the temperature rises, it stops the ultrasonic vibration and oscillation light blinks.)
-Automatic output control by TAF circuit, our unique technology.
(TAF oscillation circuit enables the most suitable output and vibration for cutting.)


Oscillation frequency40 kHz
Maximum output 20 W
Maximum power consumption 25 VA
Power supply AC100V50/60Hz
Dimensions (mm) Transmitters (body) 173 × 89 × 76 (excluding protrusions)
Hand-piece diameter 32 × 144 (blade is not included)
Mass Transmitters (body) approx. 360g
Hand-piece 100g (including hand-piece cable)
Power code 1.4m
Hand-piece cable 1.6m (straight)

New venture